Skip to content

Free delivery across OntarioFree in-home consultation5-year protection planUnbeatable price guarantee

Free delivery across Ontario · Free in-home consultation · 5-year protection plan · Unbeatable price guarantee · Call the owner: +1 (365) 275-6341
betr
motion blinds

How to measure

Two minutes with a steel tape measure. Enter the numbers exactly as measured — we make every manufacturing deduction for you.

Rather watch than read? This video walks through both mounts.

Inside mount

The blind sits inside the window opening for a clean, built-in look. Your window needs at least 2″ of depth (3.5″ for a fully flush fit).

  1. Width: measure the opening at the top and the bottom — enter the narrowest.
  2. Height: measure at the left and the right — enter the longest.
  3. Enter those exact numbers. We deduct 3 mm from the width and 2 mm from the height so the blind fits without rubbing.

Outside mount

The blind mounts on the wall or trim and covers the whole frame — the best choice for blackout and for shallow windows.

  1. Measure the full area you want covered, frame to frame.
  2. Enter those numbers. We add 0.5″ to the width and 1″ to the height so light doesn't leak around the edges.
  3. You need 1.5″ of flat surface above the window for the brackets.

Good to know

  • The cassette (headrail) is 3″ high × 3″ deep; brackets add about 0.25″.
  • The fabric runs about 2.5″ narrower than the cassette — a manufacturing standard on every roller and zebra blind, not a defect.
  • Cordless lifts are available up to 78″ wide; wider windows use the wand or motorized lift.

Installing it yourself

Hanging them yourself takes three screws per bracket. Here's how it goes up.

Rather not measure? Book a free in-home consultation

We measure, you choose, we install. Or call +1 (365) 275-6341 — you'll talk to the owner.

Book a free consultation